|
|
|
|
|
|
Enforcer Radio Box
|
Our Price: $19.95
|
|
|
The Enforcer radio box has no equal. This heavy duty ABS Injection Molded box features a see-thru blue tint with a recessed plexiglass lid that tapes down tight complete with pre-cut servo tray that accepts; 1-std. servo for throttle and 1- 1/4 scale servo for steering. This box will also accept a 5 sub-c NiCad pack or a 4-AA battery pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
Power Rod Receiver Switch
|
|
Our Price: $14.95
|
|
|
New Innovation from Enforcer! The Power Rod Receiver Switch. Universal mount, waterproof switch that replaces those trouble causing slide switches. The PR is so easy to install, simply drill one half inch hole in your radio box, or through a bulkhead if used on a scale model to mount the body of the switch. The machined aluminum cap contains a super powerful mini-neodymium magnet which when screwed on to the switch body activates an internal incapsulated reed switch. To turn the system off, simply unscrew the cap. The cap comes with a small swivel tether wire that can be attached inside the hull to a rail so the cap is always there when you need it. Designed by Tony Castronovo.
|
|
|
|
|
|
|
|
|
|
|
|
|
Radio Box Seal Tape
|
|
Our Price: $5.95
|
|
|
A must for all Enforcer radio boxes and boats, pliable clear tape is 3/4" wide and comes as a 36 yard roll.
|
|
|
|
|
|
|
|
|
|
|
|
|
Radio Box and Hull Seal Kit
|
|
Our Price: $3.49
|
|
|
New design by ENFORCER Mfg. Co. Our new radio box and thru-hull seal kits are easy to install requiring only one hole to be drilled. Install the injection molded nylon base and secure it with the jam nut. The rubber bellows simply pushes over the flanged end and secures in place with a single O-ring. Another Outstanding New ENFORCER Innovation!
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Boot
|
|
Our Price: $1.49
|
|
|
Replacement boot for ENFORCER radio box and Thru-Hull seal. Also designed to replace origonal boot from Bru-Line (metal plate) mount.
Sold each.
|
|
|
|
|
|
|
|
|
|
|
|
|
Throttle Cable Boot (Pair)
|
|
Our Price: $2.95
|
|
|
Stop water from entering your radio box through your throttle cable. Designed for use with throttle cable housings, these new small rubber bellows are designed for dual purpose and can be used over a 1/8th inch throttle cable tube or can be inserted into a 1/4 inch hole to form a water tight seal. The small end seals throttle cables and push rods up to .060 diameter.
|
|
|
|
|
|
|
|
|
|
|
|
|
Radio Box Pressure Seal
|
|
Our Price: $3.49
|
|
|
Now you can access your radio box switch without having to remove the lid by simply drilling a 5/8" hole in the box top and istalling the pressure seal. Easy to use, insert pressure seal into hole and push down on thumb lock to create a water tight seal. Release thumb lock to remove.
|
|
|
|
|
|
|
|
|
|
|
|
|
Antenna Wire Pull-N-Seal
|
|
Our Price: $2.79
|
|
|
New Enforcer Design. Conceived by our very own Steve Arnesen, this little jewel is worth its weight in gold. Tony liked the concept so much that he had injection molds made to produce this specific application part. Two per package, make sure you have one for your whole fleet!
|
|
|
|
|
|
|
|
|
|
|
|
|
Radio Safeguard
|
|
Our Price: $24.99
|
|
|
New for 2008, Micro Fail-Safe. Automatically throttles your engine down in the event of a radio signal "glitch" or signal failure. Combine this with the new Enforcer "EKG" and you will all but eliminate any potential radio failures.
EKG "Engine KIll Guard" Order#-ACC1S15
|
|
|
|
|
|
|
|
|
|
|
|
|
Invisible Radio Switch
|
|
Our Price: $37.95
|
|
|
Completely conceil your radio / receiver switch inside the radio box and not have to remove the cover or fool with leaking thru-box mechanical switches. This water-proof electro-magnetic switch is simply stuck to the radio box side, servo tray, etc. A special supplied mini-magnet is swept over the device and wella! The radio is on, do it again and to you and your friends amazement the radios off. No it's not magic, but it is just too cool to pass up. There is even a LED that flashes when the system is on. To install, it includes plugs that will work with your Futaba or JR type connectors, so nothing else is required and installation is a matter of seconds. You even get an extra wire with connector to charge your Nicads without having to disconnect anything. Now the only thing you will have to remember is to un-tape you radio lid after a weekend of fun!
|
|
|
|
|
|
|
