You are here: Home > Propellers

IMPORTANT NOTICE WHEN CHOOSING A PROPELLER

Aluminum propellers are a good performing and economical choice for stock engine applications. They do not require balancing, thinning, or sharpening which can compromise their strength. They are manufactured in an injection molding process in computer made molds that are nearly perfect by design.

Brass or copper alloy propellers are manufactured by means of gravity poured molten metals in a lost wax process. This process yields a stronger part but one that is less perfect in weight distribution and quality. Brass propellers MUST be cleaned and balanced, as an unbalanced propeller can damage your hardware, boat, as well as your personal safety and the safety of others.

We offer a prop balancer available for purchase and also the service to balance propellers prior to sending them to you. Both metals can be polished to a jewel like finish for a show look, but serves no real performance increase or decrease. We also offer this service. Both services or combined can be purchased for an additional charge. For more information on propellers you can contact us Monday - Friday from 9:30am - 5:30pm Est. @ 863 699-1231.

Sort By:

Page of 2

Enforcer Magna-Pro Balancer

Our Price: $29.95

The Pro-Balancer features high grade extremely high power neodymium magnets that will support each shaft end seperatly making contact with only one end at a time, so precision balancing can be done. This design enables you to move the prop and shaft assembly from one side to the other so you can see any run out from either side of the prop hub. This design is unlike any other balancer of its kind.

RMB 75mm Aluminum Prop

Our Price: $12.95

Material
Aluminum
Diameter
75mm
Pitch
105mm
Hub I.D.
1/4 inch
Weight
1 ounce
Application
Use with 23 to 30cc stock gas engines for surface drive application
Req. before use
No additional work required

RMB 80mm Aluminum Prop

Our Price: $13.95

Material
Aluminum
Diameter
80mm
Pitch
112mm
Hub I.D.
1/4 inch
Application
Use with 23 to 30cc stock gas engines for surface drive application
Req. before use
No additional work required

RMB 70mm Aluminum 3-Blade

Our Price: $14.95

Material
Aluminum
Diameter
70mm
Pitch
1/6
Hub I.D.
1/4 inch
Application
Use with 23 to 30cc stock or modified race engines. Made for competition surface drive application.
Req. before use
No additional work required

X467 67mm Brass Prop

Our Price: $19.60

Material
Brass
Diameter
67mm
Pitch
93.8mm
Hub I.D.
1/4 inch
Application
Use with 23 to 30cc engines. Sub-surface application.
Req. before use
For safety reasons, balancing and cleaning are required

X470 70mm Brass Prop

Our Price: $20.15

Material
Brass
Diameter
70mm
Pitch
98mm
Hub I.D.
1/4 inch
Application
Use with 23 to 30cc stock or modified gas engines. Surface or sub-surface application
Req. before use
For safety reasons, balancing and cleaning are required

X470-3 70mm 3-Blade Brass Prop

Our Price: $27.60

Material
Brass
Diameter
70mm
Pitch
98mm
Hub I.D.
1/4 inch
Weight

Application
Use with 25 to 35cc engines. Surface drive application.
Req. before use
For safety reasons, balancing and cleaning are required

X472 72mm Brass Prop

Our Price: $20.70

Material
Brass
Diameter
72mm
Pitch
100.8mm
Hub I.D.
1/4 inch
Application
Use with 23 to 30cc engines. Surface or sub-surface application.
Req. before use
For safety reasons, balancing and cleaning are required

X482 82mm Brass Prop

Our Price: $23.25

Material
Brass
Diameter
82mm
Pitch
115mm
Hub I.D.
1/4 inch
Application
Use with 30 to 50cc stock or modified gas engines. Surface drive application.
Req. before use
For safety reasons, balancing and cleaning are required

X572 72mm Brass Prop

Our Price: $20.70

Material
Brass
Diameter
72mm
Pitch
108mm
Hub I.D.
1/4 inch
Application
Use with 23 to 30cc stock or modified gas engines. Surface or sub-surface application.
Req. before use
For safety reasons, balancing and cleaning is required